WebDyn
SmartGrid & Photovoltaic Solutions!
WebdynSunPM
Gateway for solar plants with Power Management
The WebdynSunPM concentrator is used to monitor and control photovoltaic installations by collecting, analyzing and modifying the equipment parameters. Define your scenarios to modulate the power injected to the grid, optimize energy storage or manage your own consumption. Installation and programming is simple and user-friendly using the embedded web server and the configuration wizard, and it can be done remotely. It is compatible with most platforms. WebdynSunPM operates sending the data to one or two servers, or backing it up locally on a micro SD card. Its Power Management feature allows offloading, autoconsumption, storage, as well as other actions.
WebdynSun
Gateway for Solar Plants .
The WebdynSun gateway is used to monitor and collect data from solar plants. In a single device, this gateway gathers all the indicators of the inverters, the electricity meters and the environmental sensors (intensity of sunlight, temperature, wind speed, etc.). The device formats the data in CSV and sends it periodically via mobile networks, Ethernet or telephone network (STN) to a server. Installation is simple and user-friendly using the embedded web server, and it can be done remotely. It allows to operate local actions controlling files from the central server.
WebdynPulse
Gateway for the monitoring of three meters.
The WebdynPulse gateway is used to share all the data from three meters with a pulse output in a single box. This gateway’s main function is to collect data (indexes) from the three meters. Each of the three entries can be configured either in dry contact or pulse entry.It is easily installed through the webserver and it can be monitored remotely. The collected data is formatted in CSV and sent periodically to a server via GPRS or Ethernet network.
WebdynModBus
Gateway for the monitoring of Modbus equipment
The WebdynModbus gateway is used to monitor and collect data from Modbus equipment (slaves). In a single box, the gateway has a Modbus RTU or Modbus TCP interface as well as 4G/3G and Ethernet interfaces it can use to communicate with the information system. The WebdynModbus gateway behaves as a Modbus master. It is used to manage a set of slaves connected to a hard-wired bus (RTU mode) or an Ethernet link (TCP). It is easily installed through the webserver and it can be monitored remotely. The collected data is formatted in CSV and sent periodically to a server via the cellular or Ethernet network.
MTX-StarEnergy-E
Industrial IoT modem with LTE for metering applications
The MTX-StarEnergy-E is an innovative industrial modem that comprises a set of features specially oriented to the electric market. This powerful device allows the reading of IEC 60870-5-102 protocol meters via both IP-RS232/RS485 gateways with priority management through 2G/3G/4G-LTE networks, as well as CSD calls. The MTX-Star-Energy-E also monitors the presence of the meter by sending an alarm in case of no detection.
EasyTunnel
Industrial connecting IoT
EasyTunnel is an innovative and powerful all-in one solution. Thanks to its set of interfaces (RS232, RS485, dual SIM, digital I/O...) and the embedded new TITAN V6 firmware (Modbus, MQTT, IPSec, logger,...) provides a full bundle of functionalities which will fulfill all your IoT applications needs with no need for further hardware, shortening the time-to-market and providing a very cost-effective solution.
MTX-StarEnergy-M
Industrial IoT modem with LTE for metering applications
The MTX-StarEnergy-M is an innovative industrial modem that comprises a set of features specially oriented for the electric market. One of its most remarkable features is the self-provisioning according to the SIM card inserted: the router is able to detect the service provider according to the SIM inserted and autoconfigures itself (APN, sockets, etc.) depending on the provider. Also important is the selection of the service provider according to the quality of the service. In roaming SIM cards, the router analyzes the quality of the signal from several service providers and automatically connects to the one with the best quality.
EasyRouter
Industrial connecting IoT
EasyRouter is an innovative and powerful all-in-one solution. Thanks to its set of interfaces (RS232, RS485, dual SIM, digital I/O, gigabit Ethernet, GPS and WiFi) and the embedded new TITAN V6 firmware (Modbus, MQTT, IPSec, logger,…) provides a full bundle of functionalities which will fulfill all your IoT applications needs with no need for further hardware, shortening the time-to-market and providing a very cost-effective solution. As new feature, EasyRouter allows to the user to develop and run their own applications scripts (based on javascript) and giving to the end IoT application a custom style. It includes a big number of examples with source code.
MTX-Router-Q
LTE cat.4/4G entry level industrial IoT router
The MTX-Router-Q is an innovative industrial router with Gigabit Ethernet. By providing an easy integration and powerful interfaces, it avoids further hardware components. It can be used in infinite M2M and IoT applications. It has LTE cat.4 connectivity with fallback 3G/2G. The MTX-Router-Q also includes advanced functionalities such as: DHCP server, NAT, among others. It is powered by internal AC power supply and it has an internal battery for allowing a long term working hours.
MTX-Router-EOS
LTE/4G, dual SIM and 3x Ethernet compact industrial IoT route
The MTX-Router-EOS is an entry level router developed for industrial applications. It has a very compact design with a very rugged enclosure and accessories to be mounted on a wall mount. It features dual SIM, 3x Ethernet, VPN client and 3 antennas included (another one for GPS optional). The MTX-Router-EOS can be used in many different IoT applications like kiosk, telemetry, remote sensing, smart grid, security, industrial automation, etc.
WebdynEasy LoRaWAN
Gateway for sensors using LoRaWan network
The WebdynEasy LoRaWAN equipment is specific to wireless networks using LoRa radio technology. Its main function is to provide the connection between sensors and a data server using the LoRaWAN network. The purpose of the hub is to collect LoRaWAN and/or Modbus data and to send it at a regular frequency to a remote server (IS) using Ethernet or 3G/4G. The configuration is done from the embedded webserver. It uses “Over The Air Activation”, and it listens on 8 different frequencies at once. This allows it to capture data emitted using LoRaWAN from sensors that are far away. The channels can be configured locally or remotely.
MTX StarRoad II
Transportation
Industrial LTE/4G Router for Automotive
The MTX-StarRoad II is an IoT router for Automotive with its enclosure and connectors adapted to vehicles with ITxPT certification. It stands out for its 8x digital inputs, 4x outputs, 2x configurable RS232/485 ports, 2x CAN ports, Ethernet, HDMI and GPS. Furthermore, the MTX-StarRoad II can be used as an open Linux platform on which to develop your own application. Thanks to its complete set of interfaces and the possibility of integrating client software, it is the ideal solution for intelligent transportation and vehicle monitoring solutions.
