Product > Copper Tools > Termination Tools
Termination Tools

Professional Heavy-Duty Crimp
- Good for all SNAP PLUG pass Through Modular Plugs.
- Including Cat5e UTP, Cat6 UTP, Cat6A UTP, Cat5e STP, Cat6 STP and CAT6A STP.
- Crimp both Shielded & Unshielded RJ45 plugs.
- Crimp and Trim in one motion.
- Built-in lock to hold the tool in closed position when not in use.
- Built-in cable cutter and stripper.
- Built to meet standard for professional installation.
- Ratcheted for stable and precise crimping every time.
- Quality manufactured for durability and heavy-duty use.
Contact us now! Datasheet

Professional Compact Crimp Tool
- Material - Body: ABS Plastic
- Material - Handle & Cover Plate: Middle Carbon Steel
- Material - Grip: PVC Dipping
- Hardness - Handle & Cover Plate: HRC68~46
- Finish - Handle & Cover Plate: Black Oxide
- Overall Length: 140mm+/9 3mm
- Weight: 295*/- 10g

Punch Down Tool
- Capable of terminating network and telephone cables.
- Suitable for patch panels and information outlets.
- Tested for over 4,000 termination cycles.
- Compatible with 110/66 blades (can be used with various types of 110, 66, and Krone panels, outlets, and terminals).
- Adjustable Hi/Low termination force.
- Ultra-efficient spring with reinforced steel for enhanced durability.
- Silicone anti-slip pad for secure grip during operation.
- Rear storage compartment for blades.
- Made in Taiwan with export-quality standards.
Network Strip and Cut
- Adjustable stripper for networking round cables (UTP/STP)
- Built-in stripper for flat cable
- Built-in cable cutter
- Easy straightening wire function

Snap Plug UTP Cat6 Connector
- Meets ANSI/TIA Specifications
- Compliant with PoE and PoH Standards
- 50 micron fully gold plated contacts
- UL, RoHS, FCC compliant
Product > Copper Tools > Testing Tools
Testing Tools

LANSeeker Cable Tester
- Displays cable test results on main and remote units in less than 2 seconds
- Immediately detects shorts by just plugging in one end of a cable to the tester
- Identifies shorts, opens, miswires, reversed and split pairs
- No on/off switch, automatically starts test when a connection is sensed between main and remote unit
- Debug mode diagnoses and displays faults one pair at a time
- Includes tone generator
- Self-stored remote

NetChaser Kit
offers a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cable wiring, and ensuring that cables are able to support the speed capabilities of active equipment.
• Speed Certification to IEEE standards 802.3
• Cable testing to TIA568A/B

PoE Tester
- Identifies PoE standard of PSE: IEEE802.3af, IEEE802.3at, IEEE802.3bt (Type 3 and Type 4), or non-standard without having a separate power device.
- Identifies the polarity of the PoE data pair and spare pair (Endspan or Midspan or Ultra 4-pair).
- Monitor and troubleshoot IEEE802.3af/802.3at/802.3bt Type 3 (4PPoE) and 802.3bt Type 4 standard PoE systems.
- Real-Time IEEE802.3bt inline status analysis and monitoring.
- Supports Ethernet Data: 10/100/1000
- Full OLED display of PoE information without scrolling.
- Measures current and power from DC supplies.
- Verify PoE status in digital signage, CTV/PoE cameras, VOIP phones, Wi-Fi installations, POS Systems and much more.
- Battery-free operation technology.
- Compact and lightweight design.