Copper Solutions
T30210 Network Strip Cable and Cutter
- Adjustable stripper for networking round
- Compact, light weight, and rugged design,
- Built-in:
- De-twist and straighten function
- Stripper for flat cables
- Cable cutter(NOT FOR STEEL)
- UTP / STP Cables Cat 3 / 4 / 5 / 5e / 6 / 6A Cables
T50130 Heavy Duty Punch-down Tool
- Terminate & Cut Cat3 / 5 / 5e / 6 cables
- 110, 66, Krone style changeable blade
- Extra blade storage in handle
- More than 40,000 punch cycle teste
- Adjustable Low and High impact force settings
- For precise, repeatable and reliable terminations
- Design for professional use and long operation hours
SNAP PLUG™ Heavy Duty Crimp Tool
The T3 SNAP PLUG™ Tool is designed for the SNAP PLUG™ only. Good for professional installation that requires high performance. With ratchet mechanism and the combination of crimper, cutter and stripper, it’s a tool that could meet multiple needs for professional use. The parallel crimping force provides even and accurate pressure on each pins for the best termination.
- Rachet mechanism
- Maximum force saving
- High leverage and stable platform for repeatable terminations
- Built-in cutter(NOT FOR STEEL) and stripper for round cables
- Black safety cup to prevent accidents
SNAP PLUG™ (CAT 5e/CAT 6)
The T3 SNAP PLUGTM and SNAP PLUG Tool is designed to simplify the process of terminating RJ45 modular plug. It is a time-consuming process to assemble traditional RJ45 modular plug, and the most difficult part would be putting the wire into the conductor in correct order. The thicker the conductor is, the more difficult the job is going to be.
The T3 SNAP PLUGTM enables the conductors to pass through the connector itself, making it a lot easier to verify wiring order before crimp, reducing possible errors and waste of materials.
- Designed to simplify the process of terminating RJ45 modular plug
- Enables the conductors to pass through the connector itself, making it a lot easier to verify wiring order before crimp, reducing possible errors and waste of materials
T10310 10Gig RJ Crimping Tool
The T10310 is designed for 10Gig termination and it makes 2-step crimping become simple and efficient. After terminating the pins of modular plug, user can switch to the back end to crimp the external ground of the Cat 6A connector. Make sure you are using the right connector before crimping with this tool.
- Compact, lightweight, and rugged design.
- Easy to crimp with hand force.
- Termination for 10Gig performance.
- Built-in security lock for easy storage.
- Cat 6A shield modular plug connectors.
- Cat 6e / Cat 7 / over-sized Cat5e/6 industrial cables 6P6C standard RJ12 connectors.
- 6P4C / 6P2C standard RJ11 connectors.
- Not for use on standard RJ45 connectors.
Net Chaser™ Ethernet Speed Certifier & Network Tester
The Net Chaser™ Ethernet Speed Certifier & Network Tester offers a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cable wiring, and ensuring that cables are able to support the speed capabilities of active equipment.
• Speed Certification to IEEE standards 802.3
• Cable testing to TIA568A/B
The Net Chaser’s advanced discovery gives the clearest vision of network layout and interfaces between active components like servers, switches, routers, etc. All the information is collected, stored, and ready for reporting.
• Port Discovery
• Detects PoE per IEEE 802.3af/at with load test for voltage drop and which pairs the PoE is located on (class)
• IPV4 Support
• Ping to a specific IP or URL address
• Ping up to 8 IP targets at a time
• Link light to identify location on a hub/switch/router port
• Verifies DHCP connectivity and DNS
• Discovers CDP and LLDP Protocols
• Network Mapping
• VLAN Discovery
• Traceroute
• Bit Error Rate Test (BERT), Signal to Noise Ratio (SNR), SKEW
• BERT only test 100Mbps & 1Gbps
• Measures and displays length for each pair in feet or meters
• Improperly terminated cables are clearly displayed on a color graphical wire-mapping display
• Detects Length to Opens & Shorts
• Verifies Continuity for RJ45, and Coax cables
• Saves test results and easily uploaded to a computer
• Tone Generation
• ID Only remotes (Network and Coax) – up to 20 available
• Testing and ID Remotes – up to 8 available
TP500 LANSeeker™ Cable Tester
The TP500 LanSeeker is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. An easy-to-use professional grade tool, the LANSeeker is a must have for residential and commercial cable installers. When the unit senses a connection between the main and remote unit, the battery-saving auto-on feature initiates test results within 2 seconds.
The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs.
- Displays cable test results on main and remote units in less than 2 seconds
Immediately detects shorts by just plugging in one end of a cable to the tester - Identifies shorts, opens, miswires, reversed and split pairs
- No on/off switch, automatically starts test when a connection is sensed between main and remote unit
- Debug mode diagnoses and displays faults one pair at a time
- Includes tone generator
Self-stored remote
BR1 Multi-Stripper
The “Big Red” is an easy-to-use professional cable and wire stripper/cutter for most cable types/sizes in the networking world of voice, data and video.
- Coax cassette blades are pre-set for: RG59 CCTV; RG6 and RG6 Quad; RG7/11
- Adjustable stripper for twisted pair: Twisted Pair (Data) PVC & Plenum: Cat3/4; Cat5e shielded; Cat6; Cat6 shielded; Cat6A shielded
- Also works with Telephone & Audio (Voice) Round cables
- Cutters for both cable & wire conductors; not for steel
- Includes braid comb, Velcro, for folding the braid back over the cable jacket
- Replacement cassettes available
- Coax (Video): RG 59 CCTV RG 6, RG 6 Quad RG 7/11
- Twisted Pair (Data): Cat 3 & 4 PVC & Plenum Cat 5e PVC & Plenum Cat 5e shielded PVC & Plenum CAT 6 PVC & Plenum CAT 6 shielded PVC & Plenum CAT 6A shielded PVC & Plenum
- Telephone & Audio (Voice): Round cable
EZ-RJPRO™ HD Crimp Tool
The EZ-RJPRO™ HD Crimp Tool is designed for the professional installer providing a ratcheted, high leverage, ultra stable platform for consistent, repeatable terminations. This heavy duty tool is the perfect solution when working with high performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on the conductors and pair separating splines. Not only will you overcome these connectivity obstacles but you can be assured that every termination will meet FCC specifications. Compatible with all EZ-RJ45® and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP.
- Zero flex frame prevents torque loss during the crimping cycle.
- Tool steel die head assembly provides 360 degree of connector support during crimp.
- Clean, ultra flush trim on the EZ-RJ45® extended conductors.
- Expanded surface area on contact drivers delivers full, uniform crimp force.
- Built-in cutter and stripper for flat and round cable.
- Full surface to surface contact delivers uniform crimp force.
- Laser marked with wiring guide for proper wire sequence.
- EZ-RJ45 CAT5e connectors.
- EZ-RJ45 Shielded CAT5e connectors.
- EZ-RJ45 CAT6 connectors.
- EZ-RJ12/11 connectors and all other RJ45, RJ12 and RJ11 modular plug connectors except AMP.
Tele-Titan™Xg 2.0 CAT6A/10Gig Crimp Tool
The next generation in our 10Gig Termination System combines two crimpers into a single tool, making 2-step crimping simple. First, insert the 10Gig connector into the front end to terminate the contacts and switch to the back end to crimp the external ground. Like the original, the new Tele-TitanXg 2.0, along with our 10Gig shielded connectors, are engineered specifically for CAT6A cables to provide true 10Gig performance each and every time.
- One tool does the job of two tools
- Improve efficiencies by not having to change out tools in the middle of your termination
- Straight action crimp achieved with minimal hand force
- Compact and rugged design
- Terminates to industry specified crimp heights
- Gun-style lock for secure closure
- Non-slip handle and finger grooves for comfortable grip and control
- Not to be used with EZ-RJ45 or standard RJ45 modular plugs
- RJ45 CAT6A/10Gig Shielded RJ45 connectors
- CAT6e, CAT6A, CAT7 & over-sized CAT5e/6 industrial Ethernet cables
- Standard RJ12/11 connectors
Cable Remote: ID Only Network Remote Sets
These Network remotes saves cable technicians time locating unlabeled cabling. These remotes only display Identification # and is not a test remote. These remotes are available in sets of 20, 19 or 12. These sets also come in an EVA foam holder.
- Compatible with MapMaster 2.0, MapMaster 3.0, Cable Prowler, Net Prowler and Net Chaser
Net Prowler™ Cabling and Network Tester
Net Prowler™ cabling and network tester is a valuable piece of test equipment for computer network technicians and IT workers. This multi-function tester makes time consuming tasks like setting up and troubleshooting networks faster and easier than ever before. The Net Prowler offers a full set of features including network mapping, link test, IPv4 & IPv6 ping testing, DHCP testing, DNS discovery, and URL Ping tests. LLDP identifies crucial Ethernet switch information, while IP Mapping discovers and displays network IP devices. The Net Prowler includes TDR technology for verifying and tracking cable integrity for opens, shorts, miswires, split pairs and reversed pinout as well as measuring cable length of network cables, telephone and coaxial cables. To keep track of test results for internal review or archival purposes, a USB interface connects the Net Prowler to the PC controller application. Test results can be downloaded from the Net Prowler and saved to your PC with the app and exported as CSV files or PDF files for printing.
• Supports IPV4 and IPV6 protocols
• Verifies DHCP connectivity and DNS
• Pings IPV4, IPV6, and URL addresses
• CDP, LLDP, and VLAN detection
• Network Mapping identifies device name, IP address and MAC address on the network
• TCP/UDP Test
• Detects and reports current link speed and link capabilities for active Ethernet drops
• Link light to identify location on a hub/switch/router port
• Detects PoE per IEEE 802.3af/at with load test for voltage drop and which pairs the PoE is located on (class)
• Displays length measurement for each pair in feet or meters using TDR technology
• Tests CAT3/5e/6/6a Ethernet, telephone and coaxial cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
• Supports up to 8 testing and ID remotes for network & telephone cables
• Supports up to 20 network and coax ID-only mapping remotes
• Generates selectable tones on selected pins for use with tone tracers
• View saved cable tests, define cable name, save/print ALL cable testing and network testing
• Full color graphical wire-mapping
• Multilingual (English, French, Spanish, German, Italian)
